Sata Settings Screen; Boot Settings Screen; Integrated Devices Screen - Dell DL4000 Owner's Manual

Menu Item Description
Level 3 Cache Displays the total L3 cache.
Number of Cores Displays the number of cores per processor.

SATA settings screen

Menu Item Description
Embedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID modes. By default,
the Embedded SATA option is set to AHCI.
Port E Auto enables BIOS support for the device attached to SATA port E. Off disables
BIOS support for the device. By default, Port E is set to Auto.
Port F Auto enables BIOS support for the device attached to SATA port F. Off disables
BIOS support for the device. By default, Port F is set to Auto.

Boot settings screen

Menu Item Description
Boot Mode Allows you to set the boot mode of the system.
By default, the Boot Mode option is set to BIOS.
Boot Sequence Allows you to enable or disable the boot sequence retry feature. If this field is
Retry enabled and the system fails to boot, the system reattempts the boot sequence
after 30 seconds. By default, the Boot Sequence Retry option is set to Disabled.
BIOS Boot Settings Allows you to enable or disable BIOS Boot options.
UEFI Boot Settings Allows you to enable or disable UEFI Boot options.
One-Time Boot Allows you to enable or disable a one-time boot from a selected device.

Integrated devices screen

Menu Item Description
Integrated RAID Allows you to enable or disable the integrated RAID controller. By default, the
Controller Integrated RAID Controller option is set to Enabled.
User Accessible Allows you enable or disable the user accessible USB ports. Selecting Only Back
USB Ports Ports On disables the front USB ports and selecting All Ports Off disables both
20
CAUTION: Switching the boot mode may prevent the system from booting if
the operating system is not installed in the same boot mode.
NOTE: UEFI is not supported on this system.
NOTE: This option is enabled only if the boot mode is BIOS.
NOTE: This option is enabled only if the boot mode is UEFI.