Removing The Integrated Storage Controller - Dell DL4000 Owner's Manual

Hide thumbs Also See for DL4000:
Table of Contents

Advertisement

Removing the integrated storage controller

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
2.
Open the system.
3.
Push down on the two tabs at the edge of the card and lift the card off the extractors.
As the card releases from the standoffs, the connector under the card disengages from the system
board connector.
4.
Angle the card so that the other end of the card disengages from the storage-controller card holder
on the system board.
5.
Close the system.
1.
storage connector on the system board
2.
storage controller card
3.
storage-controller card holder
4.
extractors (2)
47

Advertisement

Table of Contents
loading

Table of Contents