System Battery; Replacing The System Battery - Dell DL4000 Owner's Manual

Hide thumbs Also See for DL4000:

Table of Contents

System battery

WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the

battery only with the same or equivalent type recommended by the manufacturer. See your

safety information for additional information.

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

Turn off the system, including any attached peripherals, and disconnect the system from the

electrical outlet and peripherals.

Open the system.

Press the touch points and lift the system battery cover up and away from the network daughter card

cooling shroud.

Figure 25. Removing the system battery cover

system battery cover

touch points

Locate the battery socket.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector

while installing or removing a battery.

To remove the battery, press down firmly on the positive side of the connector and lift the battery

out of the securing tabs at the negative side of the connector.

network daughter card cooling shroud

Table of Contents