Memory Settings Screen; Processor Settings Screen - Dell DL4000 Owner's Manual

Menu Item Description
System Displays the contact information of the system manufacturer.
Manufacturer
Contact
Information

Memory settings screen

Menu Item Description
System Memory Displays the amount of memory installed in the system.
Size
System Memory Displays the type of memory installed in the system.
Type
System Memory Displays the system memory speed.
Speed
System Memory Displays the system memory voltage.
Voltage
Video Memory Displays the amount of video memory.
System Memory Specifies whether system memory tests are run during system boot. Options are
Testing Enabled and Disabled. By default, the System Memory Testing option is set to
Disabled.
Memory Operating Specifies the memory operating mode. By default, the Memory Operating Mode
Mode option is set to Optimizer Mode.
Node Interleaving If this field is Enabled, memory interleaving is supported if a symmetric memory
configuration is installed. If Disabled, the system supports Non-Uniform Memory
architecture (NUMA) (asymmetric) memory configurations. By default, Node
Interleaving option is set to Disabled.
Serial Debug By default, it is set to disabled.
Output

Processor settings screen

Menu Item Description
Logical Processor Allows you to enable or disable logical processors and display the number of
logical processors. If the Logical Processor option is set to Enabled, the BIOS
displays all the logical processors. If this option is set to Disabled, the BIOS only
displays one logical processor per core. By default, the Logical Processor option is
set to Enabled.
QPI Speed Allows you to set the QuickPath Interconnect (QPI) data rate settings. By default,
the QPI Speed option is set to Maximum data rate.
18
NOTE: The Memory Operating Mode can have different defaults and available
options based on the memory configuration.