NEC EcoPowerGateway N8142-36F User Manual page 116

6-10 Troubleshooting
Other Messages
Messages displayed on upper line
When STATUS lamp is lighting in green:
On-screen
message
Prepare To Boot
When STATUS lamp is off:
On-screen
message
PCI Bus SERR 01
PCI Bus SERR 07
PCI Bus SERR 09
PCI Bus PERR 01
PCI Bus PERR 07
PCI Bus PERR 09
Description
POST completes
normally.
Description
A system error was
detected on chipset.
A system error was
detected on LAN1 device.
A system error was
detected on LAN2 device.
A system error was
detected on chipset.
A system error was
detected on LAN1 device.
A system error was
detected on LAN2 device.
Action
This is not an error.
Action
1. Take one of the following measures to
reboot (reset) the maintenance card.
* Press Ctrl + Alt + Del.
* Issue a command from Web browser of
EXPRESSSCOPE Engine 2 or NEC
ESMPRO Manager.
2. Take one of the following measures to power
off the maintenance card and then on.
* Press the Maintenance switch to power off
the maintenance card, then press it again
to power on.
* Issue a command from Web browser of
EXPRESSSCOPE Engine 2 or NEC
ESMPRO Manager.
3. If the same error persists, contact your
service representative.