Using Your Ecopowergateway; Power-On Of Ecopowergateway - NEC EcoPowerGateway N8142-36F User Manual

USING YOUR EcoPowerGateway

This section describes the basic operation of the EcoPowerGateway.

Power-on of EcoPowerGateway

Press the POWER switch on the front side of the EcoPowerGateway and make sure that the
POWER lamp goes on green.
POWER switch
IMPORTANT:
The power of the EcoPowerGateway must be turned on after 30
seconds or longer has passed from the previous power-off.
If power-on operation is performed within 30 seconds, you may fail
to power on the EcoPowerGateway. In such a case, make sure that
the power is supplied to the EcoPowerGateway, then press the
POWER switch again to turn on the power.
Before the management PC can remotely control the
EcoPowerGateway through the management port, the power of the
EcoPowerGateway must be turned on.
POWER lamp
General Description 2-11