NEC EcoPowerGateway N8142-36F User Manual page 95

BMC LAN1 Configuration submenu
Option Parameter
LAN [Auto Negotiation]
Connection
100Mbps Full Duplex
Type
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
IP Address [192.168.001.001]
Subnet Mask [255.255.255.000]
Default [000.000.000.000]
Gateway
DHCP [Disabled]
Enabled
Web Interface
HTTP [Disabled]
Enabled
HTTP Port [80]
Number
HTTPS [Disabled]
Enabled
HTTPS Port [443]
Number
Command Line Interface
Telnet [Disabled]
Enabled
Telnet Port [23]
Number
SSH [Disabled]
Enabled
SSH Port [22]
Number
Alert Interface
Alert (Primary) [Disabled]
Enabled
Alert IP [000.000.000.000]
(Primary)
Alert [Disabled]
(Secondary)
Enabled
Alert IP [000.000.000.000]
(Secondary)
Configuring Your EcoPowerGateway 4-25
Description
Specify the connection type for
management LAN port.
Specify an IP address for
management LAN.
Specify a subnet mask for
management LAN.
Specify a default gateway for
management LAN.
Set to [Enabled] to obtain an IP
address from DHCP automatically. If
you intend to specify an IP address
manually, set to [Disabled].
Set to [Enabled] to use HTTP
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTP
communication.
Set to [Enabled] to use HTTPS
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTPS
communication.
Set to [Enabled] to use Telnet
communication as a command line
interface.
Specify the TCP port number to be
used for Telnet communication.
Set to [Enabled] to use SSH
communication as a command line
interface.
Specify the TCP port number to be
used for SSH communication.
Enables or disables an alert to be sent
to the primary destination.
Specify an IP address of the primary
destination of the managed server.
Use the IP address of NEC ESMPRO
Manager server for the primary
destination.
Enables or disables an alert to be sent
to the secondary destination.
Specify an IP address of the
secondary destination.
Your Setting