NEC EcoPowerGateway N8142-36F User Manual page 99

Configuring Your EcoPowerGateway 4-29
Exit
The options on the menu are described below.
Exit Saving Changes
Select this item to exit from SETUP after saving the newly selected information in CMOS (non-
volatile memory). The selection of "Exit Saving Changes" causes the confirmation screen to appear.
If you select "Yes", SETUP is terminated with the newly selected information saved in CMOS (non-
volatile memory). Then the SETUP automatically reboots the system.
Exit Discarding Changes
Select this item to exit from SETUP without saving the newly selected information in CMOS (non-
volatile memory).
Selecting "No" on the confirmation screen [Save before exiting?] allows SETUP to be terminated
without storage of the modified information. If you select "Yes", SETUP is terminated with the
modified information saved in CMOS. Then the SETUP automatically reboots the system.
Load Setup Defaults
Select this item to return all the values of SETUP to the default values. Selecting "Load Setup
Defaults" causes the confirmation screen to appear.
Select "Yes" to return the values to the default values. Select "No" to return to the Exit menu screen.
Save Custom Defaults
Selecting the Save Custom Defaults menu and pressing Enter saves the current SETUP parameters
as the user-defined SETUP defaults. When saved, [Load Custom Defaults] menu is displayed.
Load Custom Defaults
Select this item and press Enter to load the stored custom default values. This menu does not
appear when no custom default values are stored.
Discard Changes
Select this item to return the values modified to the previous values before saving the values to
CMOS. Selecting "Discard Changes" causes the confirmation screen to appear.
Select "Yes" to discard the newly selected information and return to the previous values.