Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor
To run a Signals and Alarm parameter dump:
1. Launch a terminal application.
2. Configure the terminal application to communicate with the COM port specified previously in the
Service Port Switch – see Section 10.4, page 97.
3. Press 'I' on the PC keyboard to start the output routine.
4. To output the data to a spreadsheet:
a. use the capture capability to save a text (.txt) file
b. open the .txt file into Excel
c. at the Excel Text Import Wizard, select the file type as Delimited
Data is labelled and formatted automatically for display and analysis.
COI/AZ30E–EN Rev. D
10 Remote Computer Connection
99