ABB Endura AZ30 series Programming Manual page 57

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor
Parameter
...Display
...Operator Page 2
3rd Line View
% Oxygen
Cell Temperature
Cell Millivolts
Control Output
Bargraph
Control Output
% Oxygen (linear)
% Oxygen (log)
Autoscroll
Disabled
Enabled
Time & Date
Format
DD-MM-YYYY
MM-DD-YYYY
YYYY-MM-DD
Time & Date
Table 6.10 Display Menu (Continued)
COI/AZ30E–EN Rev. D
Comment / [Range]
Specifies the parameter represented on the bargraph.
Note. Available only when Display Mode is set to
1 x 6 + Bargraph or 2 x 9 + Bargraph (see page 52).
When Enabled, the display toggles automatically
between Operator Page 1 and Operator Page 2 at 10
second intervals.
If enabled here it can be disabled in the Operator
level.
Sets the date format and the time / date.
Sets the current local time and date.
6 Programming
Default
Cell Millivolts
% Oxygen (linear)
Enabled
YYYY-MM-DD
N / A
55