ABB Endura AZ30 series Programming Manual page 37

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor
Access Level
Logout
Read Only
Standard
Advanced
Service
Back
Enter Password
******
R S T U V W X Y Z = 1 2 3 4 5 6 7
Next
Table 6.4 Access Level and Enter Password Screens
COI/AZ30E–EN Rev. D
Access Level
The Access Level is used to access menus at Read Only, Standard,
Advanced and Service levels.
The Access Level screen is displayed by pressing
Select
(1 or 2).
To enter a password-protected level (Standard or Advanced), scroll to the
required level, and press
Password below.
To enter at Read Only level, press
Enter Password screen is bypassed and the (Read Only) Calibrate menu is
displayed – see Section 6.4.2, page 40.
Note. The Logout option is displayed when returning to Access Level from
password-protected levels.
Enter Password
At the Enter Password screen, use the
individual password character(s).
Press to select a password character.
OK
When all password characters have been selected, press
If the password is correct, the requested level is accessed.
If the password is incorrect the last viewed Operator Page is displayed with
the Locked (
Note. A default time-out period (within 5-minutes of exit) enables a user to
return to the Operator level and then re-enter the configuration menus
without re-entering the password. The configuration menu displayed at exit
is also remembered.
For periods in excess of 5 minutes, the password must be re-entered to
access the password-protected menus.
. Enter the password as described in Enter
) icon in the status bar.
6 Programming
from Operator Page
at the Access Level screen. The
and keys to navigate to
.
35