Easy Setup - ABB Endura AZ30 series Programming Manual

Endura AZ30 series integral probe and remote transmitter
Combustion oxygen monitor

6.4.1 Easy Setup

Menu
Easy Setup
Exit
Parameter
Language
Instrument Tag
Date Format
DD-MM-YYYY
MM-DD-YYYY
YYYY-MM-DD
Time & Date
Hr:Min:Sec
Year:Month:Day
Probe Type
AZ20 & Integral Tx
AZ20 & Remote Tx
AZ25 & Remote Tx
AZ30 & Integral Tx
AZ30 & Remote Tx
AZ35 & Remote Tx
Table 6.6 Easy Setup Menu
COI/AZ30E–EN Rev. D
The Easy Setup menu contains a series of easy setup options
1
for users with Advanced level access.
Standard and Read Only level users cannot access the Easy
Setup menu.
Select
Comment / [Range]
Selects the language displayed on the transmitter's local
display – see Section 6.4.5, page 52 for language options.
Used to enter an instrument tag (up to 20 characters)
displayed on the Operator Page(s) – see Section 6.4.5,
page 52.
Characters are selected from an alphanumeric list – see
Section 6.1, page 30 for navigation details.
The tag is not displayed on the Operator Page(s) if a
Display Mode of 3 x 9 is selected – see Section 6.4.5, page
52.
Selects the format of the displayed date.
Sets the current local time and date.
Selects the probe type to be used with the transmitter.
6 Programming
Default
English
N / A
YYYY-MM-DD
N / A
AZ30 &
Remote Tx
37