Signals To Axis/Spindle - Siemens SINUMERIK 828D Function Manual

2.6.3.3

Signals to axis/spindle

Axis monitoring functions
Signal name
Follow-up mode
Position measuring system 1 / 2
Controller enable
Clamping in progress
Velocity/spindle speed limitation
Feed stop/spindle stop
Hardware limit switch minus/Hardware limit switch plus
Software limit switch minus / 2nd software limit switch plus DB31, ... .DBX12.2/3
Encoder limit frequency exceeded 1 / 2
Referenced/synchronized 1 / 2
Traverse command minus / plus
Protection zones
None
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
A3: Axis Monitoring, Protection Zones
SINUMERIK 840D sl
DB31, ... .DBX1.4
DB31, ... .DBX1.5/6
DB31, ... .DBX2.1
DB31, ... .DBX2.3
DB31, ... .DBX3.6
DB31, ... .DBX4.3
DB31, ... .DBX12.0/1
DB31, ... .DBX60.2/3
DB31, ... .DBX60.4/5
DB31, ... .DBX64.6/7
2.6 Data lists
SINUMERIK 828D
DB380x.DBX1.4
DB380x.DBX1.5/6
DB380x.DBX2.1
DB380x.DBX2.3
DB380x.DBX3.6
DB380x.DBX4.3
DB380x.DBX1000.0/1
DB380x.DBX1000.2/3
DB390x.DBX0.2
DB390x.DBX0.4/5
DB390x.DBX4.6/7
145