Data Lists; Machine Data; Axis/Spindle­specific Machine Data; Setting Data - Siemens SINUMERIK 828D Function Manual

F1: Travel to fixed stop

6.5 Data lists

6.5 Data lists
6.5.1

Machine data

6.5.1.1 Axis/spindle­specific machine data
Number Identifier: $MA_
36042 FOC_STANDSTILL_DELAY_TIME
37000 FIXED_STOP_MODE
37002 FIXED_STOP_CONTROL
37010 FIXED_STOP_TORQUE_DEF
37012 FIXED_STOP_TORQUE_RAMP_TIME
37020 FIXED_STOP_WINDOW_DEF
37030 FIXED_STOP_THRESHOLD
37040 FIXED_STOP_BY_SENSOR
37050 FIXED_STOP_ALARM_MASK
37052 FIXED_STOP_ALARM_REACTION
37060 FIXED_STOP_ACKN_MASK
37070 FIXED_STOP_ANA_TORQUE
37080 FOC_ACTIVATION_MODE.
6.5.2

Setting data

6.5.2.1

Axis/spindle-specific setting data

Number Identifier: $SA_
43500 FIXED_STOP_SWITCH
43510 FIXED_STOP_WINDOW
43520 FIXED_STOP_TORQUE
6.5.3

Signals

6.5.3.1

Signals to axis/spindle

Signal name
Acknowledge fixed stop reached
Sensor for fixed stop
326
Description
Delay time, standstill monitoring for active
torque/force limiting
Travel to fixed stop mode
Sequence monitoring for travel to fixed stop
Fixed stop clamping torque default setting
Time until the modified torque limit is reached
Default for fixed stop monitoring window
Threshold for fixed stop detection
Fixed stop detection via sensor
Enabling the fixed stop alarms
Reaction to fixed stop alarms
Monitoring of PLC acknowledgments for travel to fixed
stop
Torque limit on fixed stop approach for analog drives
Initial setting of the modal torque/force limiting
Description
Selection of travel to fixed stop
Fixed stop clamping torque
Fixed stop monitoring window
SINUMERIK 840D sl
DB31, ... .DBX1.1
DB31, ... .DBX1.2
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
SINUMERIK 828D
DB380x.DBX1.1
DB380x.DBX1.2
Basic Functions