Hitachi IJ RX2 Technical Manual page 115

Error
Name
code
014 Parity error
Print format code
015
error
016 Overrun error
017 Framing error
019 2-byte code error
020 Print data code error
021 SI/SO code error
User pattern
022 character size/
character code error
High-speed
023
printing setup error
Calendar/count
024
conditions error
026 Bar code setup error
027 Printings error
Description
The parity error occurred.
The print format data value was illegal.
The overrun error occurred.
The framing error occurred.
● An illegal 2-byte code (2 bytes per
character) was transmitted.
● Only one byte of 2-byte code was
transmitted.
● The print data registration number was
illegal.
● An unregistered number was
encountered.
The SI (shift in) or SO (shift out) code
position was illegal.
The character size or character code
values were illegal.
● When necessary conditions for high
speed printing were not satisfied, NM
or QM mode was transmitted.
● When High speed printing NM or QM
mode was set, a setting which did not
satisfy necessary conditions for high
speed printing was transmitted.
● Transmitted to block where
calendar/count characters were not
present.
● Set value was outside specifications.
● Zero suppression transmission was
performed to print item for which
barcode had been set.
● A character undefined for bar code use
was found in the printings.
● The number for ITF did not consist of
an even number of numerals
beginning with an odd digit position.
● The input data for EAN-13 was not
numeric.
● The number of DM, QR code, Micro
QR code or GS1 DataBar is 2 or more
when Format setup is Free Layout.
● A dedicated character or katakana was
transmitted in a character size which
cannot be inputted.
● The three characters of a dedicated
character string were not properly
grouped.
● A count value is out of a count range.
Check
Check the baud rate and data format.
Check the print format transmission text
section.
Check the baud rate and data format.
Check the baud rate and data format.
Check the 2-byte code transmission text.
Check the print data recall / transmission
code.
Check the printings communication text.
Check the user pattern communication
text.
Check the print specifications
communication text.
Check calendar/count condition
communication text.
Check the printings print format
communication text.
Check the printings communication text
●Warning Messages 5-59