Print Condition Transmission - Hitachi IJ RX2 Technical Manual

5.3.5 Print Condition Transmission

5.3.5-1 Text
(1)Line count / print format uniformity
● Line count and print format are made uniform for all print items.
● Line count of all rows are made uniform based on the first row.
● Space between stages, character size, space between characters, whether or not to use bar code and
double width size are made uniform based on the setting value of the first print item.
● Send the message independently. The message cannot be sent together with print format, print
specs., and print contents.
● If transmission is made to the message which format setup is ''Free layout", a communication error
will occur.
[Existing machine message] Existing machine message can also be used.
(2) Format setup change
● This transmission can change the format setup.
● The print data will be adjusted to match the "After-change" Format setup.
● Print condition transmission shall be made independently.
Print condition can not be transmitted with Print format or Print specification or Print description.
● If "Format setup change" of "Free layout" is transmitted to RX2-Basic machine, a communication
error will occur.
(3)Configuration of print format text
● Print item not specified
Print format text
If item No. is not specified, it is set for all items.
To transmit print format and print specs. consecutively, transmit in the order of
and
● Print item specified
Only specified print item is applicable for change.
[Existing machine message] Existing machine message can also be used.
5-12 ●Transmission Sequences
ESC2 Header 22H
ESC Header 2BH
ESC2 Header 22H
2
print specs. If transmitted the other way round, an error will occur.
ESC2 Header 70H
Item No. specified (1 to 100)
ESC2 Header 24H Item No.
Item No. specified (1 to 100)
Classification 31H
30H
Classification33H
Format setup (30H to 32H)
Item No. Print format text
Print format text
Format setup
1
Format setup
30H:Individual
31H:Overall
32H:Free layout
print format