The State Where The Administrator Login Is Returned Automatically - Hitachi IJ RX2 Technical Manual

3.4 The state where the administrator login is returned automatically

(1) Function details
●In case that Administrator logged in to printer and left the screen untouched for 15 minutes, the new
function will switch the login condition to Users from Administrator.
●Flow diagram below shows the steps of switching to User login condition.
Switch to User of the
smallest number.
(2) Working conditions
●The working conditions of this new function are listed in Table1 below.
Only when all the conditions are met, this new function will work.
No.
1 "Administrator Automatic Deselect" is set to [Enable].
2 One or more than one user are registered as the Login user.
One of the menus below appears on the screen.
(Print description, Change message, Print format, Adjust Inter-character space, Edit message,
3 Count conditions, Print specifications, Various print setup, Save message, Select message,
Adjust print parameters, Operation management, Maintenance menu, Aux. function menu,
Environment setup menu)
4 [Apply] key does not appear on the screen.
Did any User login after
Is "Login method" set to
YES
NO
Is [Default login ID] set to
Switch to User of
[Default login ID.]
Table 1. Model combinations where Copy data is available
Working conditions
● The state where the administrator logs in is returned automatically 3-11
the power on?
NO
[Enable]?
NO
[Users]?
YES
YES
Switch to User who last
logged in.