Remote Operation Transmission - Hitachi IJ RX2 Technical Manual

5.3.10 Remote Operation Transmission

5.3.10-1 Text
ESC2
[Existing machine message] Existing machine message can also be used.
ESC
5.3.10-2 Types of control
No. Type
1 Operation start
2 Operation stop
Deflection
3 voltage control
(ON)
Deflection
4 voltage control
(OFF)
5 Fault clear
● Specify only one category of control at a time.
● Even if executing function is not possible, ACK will be answered, but no function will be executed.
5-34 ●Transmission Sequences
Header 72H Type
Header 71H Type
Types of control for operation
Starts to jet ink, and shifts from stop status to ready
status.
(Same process as with <Startup> button)
Stops ink jet, and shifts to stop status (Same process as
with <Shutdown> button)
Turns deflection voltage on
(Same process as with <Ready> button in Manual
control menu window)
Turns deflection voltage off
(Same process as with <Standby> button in Manual
control menu window)
Closes the window for any fault that has occurred.
However, the window will remain if the cause of fault
is not resolved.
Type
30H:Operation start
31H:Operation stop
32H:Deflection voltage control (ON)
33H:Deflection voltage control (OFF)
34H:Fault clear
Content Function enabled status
Stop status
When ink is being jetted
(standby, ready status, etc.)
Standby status
Ready status
When fault has occurred