Basic Operation; Start Operation - Hitachi IJ RX2-SD160 Instruction Manual

3. BASIC OPERATION

3.1 Start operation

3.1.1 Start operation
●The ink and makeup contains organic solvents.
When handling the ink and makeup, wear protective gloves and goggles so
that the ink will not directly contact your skin.
●An LCD touch panel is used for the screen.
Do not press the buttons with unreasonable force.
●If the system shuts down, turn off the main power switch.
To turn on the power and reuse the system, see "11. EMERGENCY
PROCEDURES".
Remove the print head cover, and check whether or not the print head cover and
1
the area around the nozzle are soiled by ink.
Since the IJ printer prints by ejecting ink against the print material, the outside and inside of the print
head cover are soiled by splashing of the ink from the print material. To prevent printing problems due
to soiling, check the soiling state and clean as required.
See "1.3 Print head cleaning" for a description of the cleaning method.
Turn on the power by pressing the main power switch.
2
Operating status Indicator lamps
Stop switch
3-1 ●Start operation
Loosen the screw.
Print head cover
Main power switch
Start switch
CAUTION
Around nozzle
Pull out.
When stopped only by Stop switch and
the main power switch was not turned off
at the previous operation, the main power
switch does not have to be pressed
.