Hitachi IJ RX2-SD160 Instruction Manual page 99

4.12 Update the print contents at a fixed interval (Time count)
(Optional RX2-S)
(1) Overview
● The print contents are updated at a preset update internal (minutes) timing.
● When the time that becomes the standard is set one time a day, the print contents are updated to a preset
value when that time arrives.
● The time count characters can be set at only one place in one message. Up to a maximum of 3 digits can
be set.
● The time count conditions are set at the Time count conditions screen.
● Range, reset value, reset time, and renewal period can be set as conditions.
● Updating of the print contents is always increment + 1.
● One time count condition is held for each message. To input the same time count condition at another
message, use the "Duplicate" and "Paste" functions. Input the time count conditions, memorize them by
pressing Duplicate , and press Paste at the Time count conditions screen of the other message.
● The time count characters cannot be input at the same count block as another count.
(Example) Range AA to GG, renewal period 30 minutes, reset time 05:00, reset value "AA"
Time Value Time Value
00:00 FD 04:00
00:30 FE 04:30
01:00 FF 05:00
01:30 FG 05:30
02:00 GA 06:00
02:30 GB 06:30
03:00 GC 07:00
03:30 GD 07:30
(See "(2) Operation" for the time count conditions setup procedure of this example.)
Time and count value
Time Value
GE 08:00 AG 12:00
GF 08:30 BA 12:30
AA 09:00 BB 13:00
AB 09:30 BC 13:30
AC 10:00 BD 14:00
AD 10:30 BE 14:30
AE 11:00 BF 15:00
AF 11:30 BG 15:30
Time Value Time Value
CA 16:00
CB 16:30
CC 17:00
CD 17:30
CE 18:00
CF 18:30
CG 19:00
DA 19:30
●Update the print contents at a fixed interval (Time count) 4-50
Time Value
DB 20:00 EC
DC 20:30 ED
DD 21:00 EE
DE 21:30 EF
DF 22:00 EG
DG 22:30 FA
EA 23:00 FB
EB 23:30 FC