Set The User Environment - Hitachi IJ RX2-SD160 Instruction Manual

6.1 Set the user environment

(1) Functions
● Sets the user environment values.
Repeat print sensor mode
1
● Sets the conditions that print the specified number of times at the specified interval.
signal ON
OFF-ON transition
● Disabled when Repeat count is "0".
2
Change Character orientation (switching signal mode) (Optional on RX2-B)
● Sets the forward and reverse character orientation method when performing reverse direction printing.
● The "Change mode" selection menu is different depending on the "Change Character Orientation" set value.
Character orientation by "Change Character Orientation" and "Change mode" combination
Change Character
Orientation
Reverse direction printing
Normal or inverted
Character orientation
0 or 3
(Example) Assume that the Change Character Orientation is "Reverse direction printing".
● If Change mode is "OFF = forward"
When the reciprocative printing signal is OFF, prints in the forward direction and when the signal is
ON, prints in the reverse direction.
● If Change mode is "OFF = reverse"
When the reciprocative printing signal is OFF, prints in the reverse direction and when the signal is
ON, prints in the forward direction.
For more detail, see "(3)change character orientation (change mode) supplement".
● When the Various print setup item "DIN print" is set to "Enable", reciprocative print signal is not
received.
6-2 ●Set the user environment
While print target detect sensor signal is ON.
When print target detect sensor signal is turned ON once
Change mode
OFF = forward
OFF = reverse
OFF=normal
OFF=Inverted
OFF=normal and
forward
OFF=inverted
and reverse
Character orientation
Reciprocative printing
signal : OFF
0:ABC(→)
3: (→)
1:ABC(←)
2: (←)
0:ABC(→)
3: (→)
2: (←)
1:ABC(←)
0:ABC(→)
1:ABC(←)
3: (→)
2: (←)
Reciprocative printing
signal : ON
1:ABC(←)
2: (←)
0:ABC(→)
3: (→)
2: (←)
1:ABC(←)
0:ABC(→)
3: (→)
3: (→)
2: (←)
0:ABC(→)
1:ABC(←)