Hitachi IJ RX2-SD160 Instruction Manual page 43

3.3.2 Status
(1) The printer is in one of the following states
No. State
1 Stop
2 Standby
3 Ready
4 Starting
5 Ink heating
6 Stopping
7 Drop adjust
8 Cover open
9 Service
10 Fault
(2) The current states including the on-line/off-line (communication) state is constantly displayed at the
.
top of the screen
.
The ink is stopped. No deflection voltage is applied.
The ink is ejected. No deflection voltage is applied.
The ink is ejected. The deflection voltage is applied (printing is permitted by the
sensor signal).
State in which the printer changes from the inactive state to the standby state.
Start up in process, with the ink being heated.
State in which the printer changes from the standby state to the stop state.
Period during which ink particles are not properly charged in the standby state.
Period during which the nozzle head cover is open in the standby state
Circulation control process for maintenance task execution.
State in which a fault exists.
Ready status
Print description
Message name[ ]
《
Stop status
Print description
Message name[ ]
《
Description
On line
[Ready ]
Com=1
Current user ID : user2
》
Off line
[Stop ]
Com=0
Current user ID : user2
》
2015.07.07 12:45
M
Shutdown
Manual
2015.07.07 12:45
M
Startup
Manual
●Basic operation 3-20