Hitachi IJ RX2-SD160 Instruction Manual page 45

3.3.3 Basic operation to change the settings
(1) Overview
●There are 3 types of settings.
No. Classification
1 Setting of value
Setting with few selections.
(All selection buttons are
2
displayed: mainly a choice
between the two)
Settings with many selections.
(When a button is pressed, a
3
selection menu is displayed in a
window.)
(2) Operation (Maintenance "Excitation V update" screen is used as an
example.)
●There are 3 types of settings.
Excitation V update
Excitation V-ref.
Ref. ambient temperature
Automatic update
Incremental change
Print trigger source
Print data
1 "Excitation V-ref." setting (Value input)
Display the numeric window by pressing the numbers button and input the value.
Excitation V update
Excitation V-ref.
Ref. ambient temperature
Automatic update
Incremental change
Print trigger source
Print data
Set value confirmation
method
The value is displayed on
the numeric buttons.
The pressed button
becomes yellow.
The set value is displayed
on the input button.
[Standby ]
(0〜19)
− 11 ＋
(℃)
20
Inc.
(1〜9)
1
Button input Sensor
Data to be displayed
For test
Press the numeric button.
[Standby ]
− (0〜19)
11
１１
20 (℃)
7 8 9
4 5 6 Clear
Inc.
(1〜9)
1
1 2 3
Incre-
ment
Button input Sensor
0 ← →
Decre-
For test Data to be displayed ment
Numeric windows displayed.
Set value change method
Display the value window by
pressing the numeric button
and input the value.
Press the applicable button.
Display the selection menu
window by pressing the but-
ton and select the
relevant item.
2015.07.07 12:45
Com=0
M
Manual Shutdown
HOME
2015.07.07 12:45
Com=0
M
Shutdown
Manual
Cancel
HOME
Enter
The value window is closed
and the input value is reflected
on the screen.
Each time this button is pressed,
the set value is decreased by 1.
Minimum value is input.
Each time this button is
pressed, the set value is
increased by 1.
●Basic operation 3-22