Hitachi IJ RX2 Technical Manual page 179

● "Ready" state → "Standby" state switching
● With the conveyor interlock being activated by "Ready" signal, should this "Ready" signal be turned to
"Standby", the conveyor will stop.
Press Ready
1
Then press OK .
Print description
Message name[SAMPLE1
《
● "Standby" state → "Ready" state switching
Press Standby
1
Then press OK .
Print description
Message name[SAMPLE1
《
183
Solution Press <OK> to print.
and the message "Print Abort Confirmation" appears.
Ready
]
184 ＝＝＝＝＝ Print Abort Confirmation ＝＝＝＝＝
Printing will be aborted.
Solution Press <OK> to abort.
O K
Press OK.
and the message "Print Confirmation" appears.
Standby
[ ]
]
＝＝＝＝＝ Print Confirmation ＝＝＝＝＝
The newly created print data will be printed.
O K
Press OK.
Press Ready.
Ready
[ ]
Com=0
No. 1 Current user ID：admin
》
Press Standby.
Standby
Com=0
No. 1 Current user ID：admin
》
●Change of Buttons, Icons and Status Colors 9-8
2015.07.07 12:45
M
Manual Shutdown
Cancel
2015.07.07 12:45
M
Shutdown
Manual
Cancel