Message Name - Hitachi IJ RX2 Technical Manual

5.3.4-2 Message name

(1) message number specified
● A message name is automatically attached when print data is registered.
● Based on the message name displayed in the upper left hand corner of the screen, the last 4 digits are
replaced with the message number and used as the new message name.
(Example) Registering for No. 123
Contents displayed in upper left hand corner of the screen
Message name after registration
(2) Message number and message name specified
● The specified message name attached when print data is registered.
(3) Same message name is used for other message number
● If a message name is in use for other message number, new message name will be created by using
original message name as a base and replacing its 7th and 8th digits with AA~ZZ.
(Example) Message name [ABC] is already registered on No.1. Register on No.2 using identical
message name.
Message name of No.1: [ABC
Message name of No.2: [ABC
(4)Characters available for message name
● Characters used for setting the message name transmission are different from characters used in
manual input on registration screen.
Function
Manual input
Message name transmission
5.3.4-3 Supplement
● When transmitting print data together with the print contents, send the print contents last.
5.3.4-4 Example of print data registration transmission
(1) Example of registering by specifying message name
02H 1FH 21H
STX ESC2 !
Header, classification
[Transmission results]
Massage name "ABC" is assigned to current print data and is registered under message number 12.
Alphameric character/
Symbols
Available
Available
Numbers/symbols (ASCII code): 20H to 5FH, 61H to 7AH
31H 30H 30H 31H
1 0 0 1
Print data message unmber
]
AA ]
32H 1FH 21H 32H
2 ESC2 ! 2
Header, classification
:"ABCDEFGHIJKL"
:"ABCDEFG 0123"
Accent character/
Arabic character
Available
Unavailable
41H 42H 43H 03H
A B C ETX
Message name
●Transmission Sequences 5-11