Hitachi IJ UX Instruction Manual page 148

Leading character width control (UX-D,E only)
17
● Set to prevent shrinking of the leading print character width at high speed line printing.
● Can be set when product speed matching is "None" "Enhance".
● As a means of preventing shrinking of the leading character width, unprinted particles are inserted at
the "First line width" and "Second line width" of the leading print character.
● The number of unprinted characters that can be inserted is 0 to 32.
●When all the necessary conditions of 1 to 4 below are satisfied, leading character print control is enabled.
No.
1 Product speed matching
2 The number of lines
3 Ink drop use
4 Character size
4-85 ●Set the print specifications
Page 4 of "Print specifications" screen
Print specifications
Message name[ ]
1st screen 2nd screen
Leading character with control
Avoid shrink of leading character
First row width
Secind row width
Necessary conditions for leading character width control
Item
Set to None or Enhance.
[Print format: Individual setup, Overall setup]
[Print format: Free layout]
[Product speed matching: None]
[Product speed matching: Enhance]
[Ink drop use: 1/1]
[Ink drop use: 1/2]
[Stop ]
Com=0
Makeup
3rd screen 4th screen
Disable Enable
０２
（ ０∼３ ２）
（ ０∼３ ２）
０１
Set the number of rows to 1 row or 2 rows.
Not special setting.
Set Ink drop use to 1/1 or 1/2.
Set Ink drop use to 1/1.
All character sizes can be used.
Set the character size 4
×
7 10, 5 3 (chimney), 5
× ×
2015.07.07 12:45
Ink
Startup
Manual
HOME
Edit
message
Print
format
Back
Conditions
5, 5 5, 5 8(5 7), 9
× × × ×
5(chimney), or 7 5(chimney).
× ×
8(9 7),
×