Hitachi IJ UX Instruction Manual page 239

(2) When warning was generated
(a) Previous HMI
Message No.
081 ◇◇◇◇◇ Ink Low Warning ◇◇◇◇◇
The ink level in the ink reservoir is low.
Cause 1. The ink reservoir is almost empty.
2. The Low Level sensor in the ink reservoir is faulty.
Solution 1. Replace the Ink Cartridge within 60 minutes.
2. Check the Low Level sensor.
(b) New HMI
The name of the warning
message is displayed.
Ink Low Warning
The ink level in the ink reservoir is low.
Cause 1. The ink reservoir is almost empty.
2. The Low Level sensor in the ink reservoir is faulty.
Solution 1. Replace the Ink Cartridge within 60 minutes.
2. Check the Low Level sensor.
●When Close is pressed, the warning window is closed, but the warning state is not cleared.
The warning name is displayed in the warning display area (see the figure above).
●If the warning state is cleared, the warning display is automatically closed.
The name of the warning
message is displayed.
The description, cause,
and solution are displayed.
WARNING
The description, cause,
and solution are displayed.
Close
Message No.
×
No.081
CLOSE
●Display when warning or fault was generated 9-2