Hitachi IJ UX Instruction Manual page 27

(2) Message
For details of message, refer to "9. When Warning or Fault was generated".
[New HMI]
Message name
The Description,
Cause and
Main Ink Tank Too Full
Solution
Cause 1. The valve (MV2) or valve (MV7) is faulty.
Solution 1. Drain proper amount of ink in the main ink tank.
[Previous HMI]
Message No.
002
Cause 1. The valve (MV2) or valve (MV7) is faulty.
Solution 1. Drain proper amount of ink in the main ink tank.
Reset
Message type
The ink level in the main ink tank is too high.
2. The High Level sensor in the main ink tank is faulty.
2. Check the High Level sensor.
3. Contact your local distributor.
Reset
Main Ink Tank Too Full
◆◆◆◆◆
The ink level in the main ink tank is too high.
2. The High Level sensor in the main ink tank is faulty.
2. Check the High Level sensor.
3. Contact your local distributor.
Fault
Message name
Close
HELP
?
?
×
No.002
Message No.
Button
Close
HELP
HELP
The Description,
Cause and
Solution
Button
Close
●Screen display 2-6