Hitachi IJ UX Instruction Manual page 237

When a new cartridge bottle is set, press the lever handle down and it into the
6
printer.
● Be careful not to get your hand or fingers pinched when pushing down the
lever handle. (See the figure below.)
The cartridge replacement (makeup refill) is now completed.
7
Press <OK> at the IJ printer guidance screen.
Pressing <OK> confirms that makeup refill is complete.
● The IJ printer on which the "Makeup Level Sensor Broken 1" Fault appeared,
the Makeup Cartridge can NOT be replaced until "Makeup Low" Warning
appears.
Full
Lever handle
CAUTION
Lever handle
CAUTION
<Remaining Makeup Icon>
Lever handle
Lever handle
Empty
Replaceable Makeup level :
After the "Makeup Level
Sensor Broken 1" Fault
appeared.
●Replenishing the makeup 8-13