Other Messages - Hitachi IJ UX Instruction Manual

No. Message
163 Ink Low Warning 2
Makeup Low
164
Warning 2
Makeup Level
165
Sensor Broken 4

9.2.3 Other messages

No. Message
Ink Temperature
187
Correction Notice
No Ink
200 Concentration
Control
Print Data/Settings
201
Notice
Print Start up
209
Failure
USB Memory
210
Error
Meaning of message
The level sensor in the ink reservoir does
not work properly.
If IJ printer continues running as it is,
IJ printer will stop the ink jet within 60
minutes.
The level sensor in the makeup reservoir
does not work properly.
If IJ printer continues running as it is,
IJ printer will stop the ink jet within 60
minutes.
The level sensor in the makeup reservoir
does not work properly.
Meaning of message
The selected setup does not allow ink
temperature corrections to be made.
( P1-4)
The current settings have made ink
concentration control unavailable.
( P1-5)
Recent changes to print data and printer
settings may have been lost. In the previous
session, power was cut OFF suddenly.
Printer startup failed.
USB memory is not inserted. Or an error
was generated when reading USB memory.
Remedy
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
Remedy
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Check print contents and each
setting value.
● Turn the printer power OFF
and then back ON after 10
seconds.
● Contact your nearest local
distributor.
●Insert correctly.
●Replace with a new USB
memory.
●On-screen message descriptions 9-12