Hitachi IJ UX Instruction Manual page 34

4 With the print head cover removed, press the STARTUP
● Ink is ejected from the nozzle. (The status changes from "Stop" to "Starting".
● Operate the unit with the end of the print head remaining inside the beaker.
3-7 ●Start operation
START PRINTING
Ink Jet Startup Confirmation
The ink jet will be turned ON.
Solution 1. To change the printer status to Ready, press <Ready>.
2. To change the printer status to Standby, press <Eject ink>.
Ready
Press Ready .
Press STARTUP .
TEST
STARTUP
SETTINGS LOGIN
CONFIRMATION
Eject ink
→ Ready .
×
No.050
Cancel