Hitachi IJ UX Instruction Manual page 244

No.
Inside Temperature
32
Sensor Fault
Ink Heating Unit
34
Temperature Low
35 Model-key fault
37 Language key fault Language-key recognition failed.
243 Ink Low Fault 2
Makeup Low
244
Fault 2
Circulation Route
251
Pressure Is High
(2) Faults that do not invoke ink stoppage
No.
35 Model-key fault
37 Language key fault Language-key recognition failed.
Print Data
27 Changeover
Error C
Print Data
28 Changeover
Error M
Free Layout
38
Printing Failure
External
40 Communication
Error nnn
9-7 ●On-screen message descriptions
Message
The inside temperature measurement is out
of normal range.
The ink heater in the print head is unable to
heat the ink enough to reach the correct
operating temperature.
The heater will be temporarily deactivated.
Model-key recognition failed.
The level sensor in the ink reservoir does
not work properly.
IJ printer will stop the ink jet.
The level sensor in the makeup reservoir
does not work properly.
IJ printer will stop the ink jet.
Circulation route pressure is getting high
Message
Model-key recognition failed.
The print data change procedure was
incomplete.
The print data change procedure was
incomplete.
The free layout printing was aborted while
the message was printing.
The serial communication port had a data
error.
Meaning of message
Meaning of message
Remedy
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
Remedy
● Contact your nearest local
distributor.
● Contact your nearest local
distributor.
● Check the data entered
● Check the data entered
● Delete some print items or
decrease the setting of the ink
drop use. ( 4.8.6)
● Note the error code and see
that no more error occure.
( Technical manual 5.7)