ABB ACS550-01 User Manual page 110

110
Code Description
• The table below shows the ACS550 PFC motor assignments for some typical settings in the Relay Output
parameters (1401...1403 and 1410...1412), where the settings are either =31 (
where the Autochange function is disabled (8118
Parameter Setting
1 1 1 1 1
4 4 4 4 4
0 0 0 1 1
1 2 3 0 1
31 X X X X X 1 Aux.
31 31 X X X X 2 Aux.
31 31 31 X X X 3 Aux.
X 31 31 X X X 2 X
X X X 31 X 31 2 X
31 31 X X X X 1 Aux.
• The table below shows the ACS550 PFC motor assignments for some typical settings in the Relay Output
parameters (1401...1403 and 1410...1412), where the settings are either =31 (
where the Autochange function is enabled (8118
Parameter Setting
1 1 1 1 1
4 4 4 4 4
0 0 0 1 1
1 2 3 0 1
31 31 X X X X
31 31 31 X X X
x 31 31 X X X
X X X 31 X 31 1 X
31 31 X X X X
8118 AUTOCHNG INTERV
Controls operation of the Autochange function and sets the interval between changes.
• The Autochange time interval only applies to the time when the speed regulated motor is running.
• See parameter 8119
• The drive always coasts to a stop when autochange is performed.
• Autochange enabled requires parameter 8120
0.0 = – Disables the Autochange function.
NOT SEL
0.1...336 = The operating time interval (the time when the start signal is on) between automatic motor changes.
Warning! When enabled, the Autochange function requires the interlocks (8120 interlocks = value > 0)
enabled. During autochange the interlocks interrupt the drive's power output, preventing damage to the
contacts.
Start-Up
ACS550 Relay Assignment
1 8 Autochange Disabled
4 1
RO1 RO2
1 1
2 7
X X
Aux. X
Aux. Aux.
Aux. Aux.
X X
Aux. X
ACS550 Relay Assignment
1 8 Autochange Disabled
4 1
RO1 RO2
1 1
2 7
1 PFC PFC X
2 PFC PFC PFC
1 X PFC PFC
X X
0 PFC PFC X
for an overview of the Autochange function.
AUTOCHNG LEVEL
= 0).
AUTOCHNG INTERV
RO3 RO4 RO5
X X X
X X X
X X X
X X X
Aux. X Aux.
X X X
= value > 0).
AUTOCHNG INTERV
RO3 RO4 RO5
X X X
X X X
X X X
PFC X PFC
X X X
= value > 0.
INTERLOCKS
ACS550 User's Manual
), or =X (anything but 31), and
PFC
RO6
), or =X (anything but 31), and
PFC
RO6