ABB ACS550-01 User Manual page 115

ACS550 User's Manual
Code Description
5 = 5 – Enables the Interlock function, and assigns a digital input (starting with
DI
PFC relay. These assignments are defined in the following table and depend on:
• The number of PFC relays (number of parameters 1401...1403 and 1410...1412) with value = 31
• The Autochange function status (disabled if 8118
No. PFC Autochange Disabled
Relays
0 1...
DI
5: Speed Reg Motor
DI
6: Free
DI
1 1...
DI
5: Speed Reg Motor
DI
6: First PFC Relay
DI
2 Not allowed
3...6 Not allowed
6 = 6 – Enables the Interlock function, and assigns digital input
DI
motor.
• Requires 8118
AUTOCHNG INTERV
No. PFC
Relays
0
1
2...6
Autochange Enabled
(P 8118)
4: Free Not allowed
DI
4: Free 1...
DI DI
5: First PFC Relay
DI
6: Free
DI
1...
DI
5: First PFC Relay
DI
6: Second PFC Relay
DI
Not allowed
= 0.
Autochange Disabled
1... 5: Free
DI DI
6: Speed Reg Motor
DI
Not allowed
Not allowed
= 0, and otherwise enabled).
AUTOCHNG INTERV
(P 8118)
4: Free
DI
4: Free
DI
6 to the interlock signal for the speed regulated
DI
Autochange Enabled
Not allowed
1... 5: Free
DI DI
6: First PFC Relay
DI
Not allowed
5) to the interlock signal for each
DI
)
PFC
115
Start-Up