ACS550 User's Manual
Control Connection
Analog Inputs and
Digital Inputs
(Digital Outputs)
Specifications
Efficiency
Approximately 98% at nominal power level.
Cooling
Free space around the unit
Dimensions, Weights and Noise
The dimensions and mass for the ACS550 depend on the frame size and enclosure
type. If unsure of frame size, first, find the "Type" code on the drive labels. Then look
up that type code in the "Technical Data" on page 127, to determine the frame size.
A complete set of dimensional drawings for ACS550 drives is located in the ACS550
Technical Reference manual.
See table heading "Hardware Description" on page 21.
Outputs
Digital input impedance 1.5 kΩ. Maximum voltage for digital inputs is 30 V.
• Max. contact voltage: 30 V DC, 250 V AC
• Max. contact current / power: 6 A, 30 V DC; 1500 VA, 250 V AC
• Max. continuous current: 2 A rms (cos ϕ = 1), 1 A rms (cos ϕ = 0.4)
Relays
• Minimum load: 500 mW (12 V, 10 mA)
• Contact material: Silver-nickel (AgN)
• Isolation between relay digital outputs, test voltage: 2.5 kV rms, 1 minute
Cable
See "Control Cables" on page 13.
Method
Control Connection Specifications
Cooling Specifications
Internal fan, flow direction from bottom to top.
• 200 mm (8 in) above and below the unit
• 25 mm (1 in) along each side of the unit.
131
Technical Data