Other Modes; Access To Main Menu Modes; Summary Of The Modes - ABB ACS550-01 User Manual

28
The reference can be modified in the local control mode, and can be parameterized
(using Group 11: Reference Select) to also allow modification in the remote control
mode.

Other Modes

Besides the Control mode, the Assistant Control Panel
has:
• Other operating modes that are available through the
main menu.
• A fault mode that is triggered by faults. The fault
mode includes a diagnostic assistant mode.

Access to Main Menu Modes

To reach the main menu:
• Press EXIT, as necessary, to step back through the menus or lists associated with
a particular mode. Continue until you are back to the normal mode.
• Press MENU from the normal mode.
At this point, the middle of the display is a listing of the other modes, and the top-
right text says "Main menu"
• Use Up/Down buttons to scroll to the desired mode.
• Press ENTER to enter the mode that is highlighted (reverse video).

Summary of the Modes

The other modes are:
• Parameters – Use this mode to edit parameter values individually. For more
information, see "Parameters Mode" on page 29. Access to this mode is from the
main menu.
• Start-up Assistant – When the drive is first powered up, the Start-up Assistant
asks you questions. Your answers set a few basic parameters. Other assistants
are available to support common operations. For more information, see "Start-up
Assistant Mode" on page 29. Access to this mode is from the main menu (and is
automatic at initial drive power up).
• Changed parameters – This mode simply displays a list of the parameters that
have been changed from the default values set at the factory. Access to this
mode is from the main menu.
• Fault logger – This mode displays a fault history list. You can select a fault and
display critical drive status information associated with the fault.
• Drive parameter backup – The backup can be complete or partial. Use the
complete backup, for example, when replacing a drive with a new one. Use the
partial backup, for example, to copy parameters from one drive to another (the
drives do not need to be the same size). Access to this mode is from the main
menu.
– Upload stores the parameters to the panel.
Start-Up
ACS550 User's Manual