Installation Flow Chart - ABB ACS550-01 User Manual

6
Installation
Study these installation instructions carefully before proceeding. Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
Warning! Before you begin read "Safety" on page 3.

Installation Flow Chart

The installation of the ACS550 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
PREPARE for installation
UNPACK the drive
PREPARE the Mounting Location
REMOVE the front cover
MOUNT the drive
INSTALL wiring
CHECK installation
RE-INSTALL the cover
APPLY power
START-UP
Installation
Task
"Preparing for Installation" on page 7.
"Unpack the Drive" on page 14.
"Prepare the Mounting Location" on page 14.
"Remove Front Cover" on page 14.
"Mount the Drive" on page 15.
"Install the Wiring" on page 15.
"Check Installation" on page 23.
"Re-install Cover" on page 23.
"Apply Power" on page 23.
"Start-Up" on page 24.
ACS550 User's Manual
See