Install The System Board - Lenovo thinksystem SR630 Maintenance Manual

Figure 128. System board removal
Step 1. Lift the release pin
the front of the server.
Step 2. Lift the system board out of the chassis.
If you are instructed to return the old system board, follow all packaging instructions and use any packaging
materials that are provided.

Install the system board

Use this information to install the system board.
Before installing the system board, touch the static-protective package that contains the new system board
to any unpainted surface on the outside of the server. Then, take the new system board out of the package
and place it on a static-protective surface.
To install the system board, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
1
and hold the lift handle
2
at the same time and slide the system board toward
.
Chapter 3 Hardware replacement procedures
133