Remove A Pcie Adapter; Install A Pcie Adapter - Lenovo thinksystem SR630 Maintenance Manual

Notes:
• Depending on the specific type, the PCIe adapter might look different from the illustrations in this topic.
• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to the
instructions in this topic.

Remove a PCIe adapter

Use this information to remove a PCIe adapter.
Before removing a PCIe adapter:
1. Remove the top cover. See "Remove the top cover" on page 42.
2. Remove the riser assembly. See "Remove a riser card" on page 70.
To remove a PCIe adapter, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku: http://list.youku.com/albumlist/show/id_50462008
Table 16. PCIe adapter removal
Figure 59. Riser 1 assembly (LP+LP)
Step 1. (Skip this step for riser 2 assembly.) Pivot the latch on the riser bracket to the open position.
Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe adapter slot on the riser
card.
If you are instructed to return the old PCIe adapter, follow all packaging instructions and use any packaging
materials that are provided.

Install a PCIe adapter

Use this information to install a PCIe adapter.
74
ThinkSystem SR630 Maintenance Manual
Figure 60. Riser 1 assembly (LP
+FHHL) Figure 61. Riser 2 assembly (LP)