CAUTION:
Hazardous moving fan blades nearby.
Remove the air baffle
Use this information to remove the air baffle.
Before removing the air baffle:
1. Remove the top cover. See "Remove the top cover" on page 42.
2. If there is a RAID super capacitor module installed on the bottom of the air baffle, disconnect the RAID
super capacitor module cable first.
To remove the air baffle, complete the following step:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Figure 28. Air baffle removal
Step 1.
Grasp the air baffle and carefully lift it out of the server.
Attention: For proper cooling and airflow, install the air baffle before you power on the server.
Operating the server with the air baffle removed might damage server components.
Install the air baffle
Use this information to install the air baffle.
.
Chapter 3
Hardware replacement procedures
45