Air Baffle Replacement; Remove The Air Baffle - Lenovo ThinkSystem SR665 V3 User Manual

1. Reconnect the power cords and any cables that you removed.
2. Power on the server and any peripheral devices. See
3. Update the server configuration. See

Air baffle replacement

Follow instructions in this section to remove and install the air baffle.
• "Remove the air baffle" on page 57
• "Install the air baffle" on page 59

Remove the air baffle

Follow instructions in this section to remove the air baffle.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. Make preparation for the task.
a. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the
top cover, or remove the server from the rack. See
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 40
48.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Power on the server" on page
"Remove the server from rack" on page
.
Chapter 5 Hardware replacement procedures
48.
164.
to ensure that you
49.
57