Lenovo ThinkSystem SR665 V3 User Manual page 112

• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• For PCIe adapter installation rules, see
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr665v3/7d9a/downloads/
driver-list/ to see the latest firmware and driver updates for your server.
• Go to "Update the firmware" on page 189
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. Touch the static-protective package that contains the new part to any unpainted surface on the
outside of the server. Then, take the new part out of the package and place it on a static-protective
surface.
Step 2. (Optional) If you have removed the riser card, install the riser card first.
Figure 61. Installing the riser card to riser 1 or 2 cage
ThinkSystem SR665 V3 User Guide
102
48.
"PCIe slots and PCIe adapters" on page
for more information on firmware updating tools.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
46.