Lenovo ThinkSystem SR665 V3 User Manual page 166

S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• When removing a hot-swap fan without powering off the server, do not touch the system fan cage. With
power on, complete the replacement within 30 seconds to ensure proper operation.
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top
cover, or remove the server from the rack. See
Step 2. Remove the top cover. See
Step 3. Remove the system fan.
Figure 112. Removing the system fan
a. Grasp the top of the system fan with your fingers.
b. Lift the system fan out of the server.
ThinkSystem SR665 V3 User Guide
156
and "Safety inspection checklist" on page 40
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Remove the top cover" on page
"Remove the server from rack" on page
161.
to ensure that you
49.