Lenovo ThinkSystem SR665 V3 User Manual page 104

• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. Remove the OCP module.
Figure 51. Removing the OCP module
a. Loosen the thumbscrew that secures the module.
b. Pull out the OCP module.
Step 2. (Optional) Remove the OCP label.
Figure 52. Removing the OCP label
After you finish
ThinkSystem SR665 V3 User Guide
94
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.