Install The Front I/O Module - Lenovo ThinkSystem SR665 V3 User Manual

Figure 36. Removing the front I/O module
a. Remove the screw that secure the front I/O module.
b. Slide the front I/O module out of the front chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the front I/O module

Follow instructions in this section to install the front I/O module.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
and "Safety inspection checklist" on page 40
48.
.
Chapter 5 Hardware replacement procedures
to ensure that you
75