Lenovo thinksystem SR630 Maintenance Manual page 64

CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
Before installing a system fan, touch the static-protective package that contains the new system fan to any
unpainted surface on the outside of the server. Then, take the new system fan out of the package and place
it on a static-protective surface.
To install a system fan, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku: http://list.youku.com/albumlist/show/id_50462008
Figure 42. System fan installation
Step 1. Align the two holes in the system fan with the two pins on the chassis.
Step 2. Press the system fan down until it is seated correctly in the slot. Ensure that the fan connector is
installed correctly to the connector on the system board.
After installing the system fan, complete the parts replacement. See "Complete the parts replacement" on
page 141.
56
ThinkSystem SR630 Maintenance Manual