Lenovo thinksystem SR630 Maintenance Manual page 79
Hide thumbs
Also See for thinksystem SR630:
- Maintenance manual (276 pages) ,
- Product manual (75 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Before removing a riser card, remove the top cover. See "Remove the top cover" on page 42.
To remove a riser card, complete the following steps:
Note: The riser assembly you want to remove might be different from the following illustrations, but the
removal method is the same.
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Step 1.
Grasp the riser assembly by its edges and carefully lift it out of the chassis.
Figure 55. Riser assembly removal
Step 2.
If there is any PCIe adapter installed on the riser card, record the cable connections first. Then,
disconnect all cables from the PCIe adapter and completely remove the riser assembly out of the
chassis.
Step 3.
Remove the PCIe adapters that are installed on the riser card. See "Remove a PCIe adapter" on
page 74.
Step 4.
Remove the two screws that secure the riser card to the bracket. Then, remove the riser card.
.
Chapter 3
Hardware replacement procedures
71
Advertisement
Table of Contents
