Lenovo thinksystem SR630 Maintenance Manual page 55

Before removing the rack latches:
1. If the server is installed with the security bezel, remove it first. See "Remove the security bezel" on page
51.
2. Use a flat-blade screwdriver to remove the ID label plate on the right rack latch and place it in a safe
place.
Figure 30. ID label plate removal
To remove the rack latches, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Step 1. On each side of the server, remove the two screws that secure the rack latch.
.
Chapter 3 Hardware replacement procedures
47