Install A Riser Card - Lenovo thinksystem SR630 Maintenance Manual

Figure 56. Riser card removal
If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are provided.

Install a riser card

Use this information to install a riser card.
Before installing a riser card, touch the static-protective package that contains the new riser card to any
unpainted surface on the outside of the server. Then, take the new riser card out of the package and place it
on a static-protective surface.
To install a riser card, complete the following steps:
Note: The riser assembly you want to install might be different from the illustrations below, but the
installation method is the same.
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
Step 1. Align the screw holes in the new riser card with the corresponding ones in the bracket. Then, install
the two screws to secure the riser card to the bracket.
72
ThinkSystem SR630 Maintenance Manual