Mitsubishi Electric R16MTCPU Programming Manual page 234

Cam for rotary cutter
Set the auto-generation data of the rotary cam cutter. (sheet length, synchronization width, etc.)
Sheet synchronization width
Synchronous position adjustment
-: The synchronous section is
adjusted to the sheet start side.
0: The center of the sheet is in the
synchronous section.
+: The synchronous section is
adjusted to the sheet end side.
Cam axis current value per cycle
Acceleration/deceleration width
Sheet synchronization width
Acceleration/deceleration width
Cam axis (Synchronous axis) speed
Synchronous speed
(Feed sheet speed)
Cam stroke ratio
(Cam data by auto-generation)
4 OPERATION CONTROL PROGRAMS
232
4.16 Advanced Synchronous Control Dedicated Function
Synchronous
axis
Sheet length
Synchronous section acceleration ratio
When 0%, it is as fast as synchronous speed.
100%
Synchronous axis length
Synchronous axis cycle length/diameter
Acceleration/deceleration width
Feed sheet
Sheet length
t
Asynchronous speed
(Automatically calculated)
t
t